Façade defects · Cladding

Brick slip cladding: debonding, falling slips and fire.

Brick slips look like brickwork but behave like cladding. What goes wrong, what may be behind them, and how they are investigated.

MTC defects libraryCladding, render and fixingsUpdated November 2026
At a glance
What it isThin brick tiles bonded or clipped to a backing board, carrier system or insulation.
Main riskSlips falling, water getting behind, and unknown backing or insulation.
Common onApartment blocks, student housing and mixed-use buildings from the 2000s onwards.
Usually spotted byCondition surveys, FRAEWs and residents reporting fallen slips.

Slips falling or sounding hollow? We survey, open up and report on brick slip systems, with our own access team. See our façade condition surveys or contact us for a quote. If the problem is already in dispute, our façade expert witness service can help.

Brick slips are cladding, not brickwork

A brick slip is a thin slice of brick, typically 15–25 mm thick. It is either bonded with adhesive to a board or insulation, or held in a metal or plastic carrier fixed to the wall. From the street it looks like solid brickwork, which is why it is often missed or wrongly assumed to be masonry. What sits behind it matters for both safety and fire.

How to recognise it

  • Slips that are cracked, loose or missing.
  • Hollow-sounding areas when tapped.
  • Regular vertical joints where carrier panels meet.
  • Brick returns at window reveals that look too thin.
  • Staining, efflorescence or algae below joints.

Why it happens

  • Adhesive not suited to the backing, or poorly applied.
  • Movement in the backing board or frame not allowed for.
  • Water getting behind the slips and freezing.
  • Corrosion or failure of carrier rails and fixings.
  • Insulation or boards behind the slips that move or degrade.

Why it matters

  • Falling slips. A slip falling from height can injure someone.
  • Fire safety. Some systems use combustible insulation, boards or adhesives. These are appraised under PAS 9980. See combustible insulation.
  • Water ingress into the frame or wall behind.

How we investigate it

We survey every elevation, map loose and missing slips, and tap to find debonded areas. Openings remove a small section to record the slip, adhesive or carrier, board, insulation and frame, with any product markings. Where the building needs a FRAEW, the same openings serve both. See intrusive investigations.

How it is put right

  • Make the façade safe by removing loose slips.
  • Re-fix or replace slips to the system's details.
  • Replace failed carriers or fixings.
  • Where the backing is combustible and the risk is not acceptable, strip and replace the system.

See our published case studies

What to send us

The address, the building's height, photos of loose or missing slips, and any previous reports or O&M manuals. Email enquiries@mtconsult.co.uk, use our contact form or call 0800 048 5229. We typically respond within one working day.

Frequently asked questions

How can you tell brick slips from real brick?

Check reveals and corners for thin returns, look for regular carrier joints, and tap for hollow areas. An opening confirms it.

Are brick slips combustible?

The slips themselves are usually not. The board, insulation or adhesive behind them may be.

Can fallen slips just be stuck back on?

Only if the cause is understood. If the adhesive or backing has failed, more will follow.

Related

Talk to us

Problems with brick slips?

Our in-house contracting team provides the access and opening-up, so you have one point of contact.

© McKay Turner Consulting LtdFaçade defects · Brick slip cladding